FLOOR

* Plate 3/16” A-36 Carbon Steel
Understructure, 3” channel on 18” centers
Solid bullnose 1-1/4” thick inserted into rails 5”
Rails, 6” x 2” x 1/4”
Nose rollers, 4” diameter x 6” long
Wheels: Rear, 10” dia. x 8” long
Front, 10” dia. x 5” long
Gussets: every other crossmember
 

SIDES

* Sheet 7 Gauge A-36 carbon steel
Taper from front to rear is 5” each side
* One hand to ratchet latch back door system
Gussets on both sides, sides to floor
Fire plug openings, 4” with plastic plugs

 

Bulkhead

* 7 Gauge Sheet, A-36 carbon steel
Four way tapered
* Channel 4” uprights (2) with floor gussets

ROOF

* 12 Gauge SHEET, A-36 carbon steel

DOORS

* 11 Gage Sheet, A-36 carbon sheet
Hinges (4) heavy duty with grease fittings
Framed with 3” x 4” x 11” ga. structural tubing
Compactor opening 46” x 65” reinforced
* Tarp hooks, 4-across top, 4 across bottom and 2 - on both sides.

PAINT

* Container shall be thorougly scraped and cleaned.
Exterior to be primed with (1) coat low V.O.C. alkyd primer.
(1) finish coat to be hight solid low V.O.C. enamel
* Standard colors only
*Safety reflectors applied to semi-dry paint on all four corners to assure bonding